Melting Furnace
Advantage:
1 Stable Performance, more than 17 years experience
2 CE certificated, good quality
3 Cooperated with CHOW TAI FOOKS, Matsushita, Foxconn, Media, Gree and ZHIGAO air conditioning
4 High Speed Melting
5 Can melt all kinds of the metals, including Gold, silver, platinum, copper, Brass, steel, iron, Tin, alum and so on .
6 Siemens IGBT
7 IXYS Filter Capacity
8 All screws are Stainless Steel
1) IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Water Temperature Display in front Panel
4) Display of heating power and heating current and oscillating frequency;
5) Simple to install, Installation can be done by unprofessional person very easily
7 Light Weight
8 The equipment can movement, very convenient to work at the laboratory.
9 Easy to install the furnace, just prepare one water tank can work this furnace
.
| Type |
HF-25KW-2-3KG |
| Work power |
3800V* 3 phase 50HZ Or 60HZ |
| The range of operating voltage |
340-420V(460-510v) |
| Output power |
25KW |
| Capacity |
2-3KG |
| Fluctuating frequency |
30-80KHZ |
| Output current |
200-1050A |
| Timing (Heat time, Retain time , Cool time) |
1-99S |
| The flow rate of cooling water |
0.06-0.12Mpa 9L/Min |
| Water temperature protection point |
40ºC |
| Duty cycle |
100% |
| Weight |
65kg
|
| Size |
500*400*770MM |
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee.
Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.
Audited Supplier 
){kind=link}