DSP-60kw 10% off Digital Medium Frequency Induction Heating Machine for Forging

Product Description

DSP-60KW Digital Medium Frequency Induction Heating Machine for Forging 




 1 IGBT module and Inverting technologies of third generation been used;

Higher reliability and lower maintenance cost.

2 100% Duty cycle, continuous working is allowed at maximum power output.

3 Display of Voltage and heating current and Working frequency;

4 Simple to install, Installation can be done by unprofessional person very easily;

5 Light weight. fasting heating, good performance for draw and hot forging application.

6 Water pressure and temperature protection system.

7 Over Current, Over voltage, Under voltage protection system.

8 The separated models are designed to fit the dirty surrounding of some cases.

Type	DSP-60KW
Work power	3×380V/415V,440V,480V
The range of operating voltage	340V-430V
Output power	60 KW
Working Capacity ( diamater)	10-50MM
Input current	90A
Working Duty	24hours withou stop
Fluctuating frequency	5-20KHZ
The flow rate of cooling water	0.08-0.16 Mpa  28L/Min
Water temperature protection point	50ºC
Duty cycle	100%(40degree room temperature)
Weight:	Main parts: 85KG/ with package 98kg
Furnace Weight	About 300KG /with package 330kg
Feeding system	Automatic Feeding System
Working Material	Steel, Copper, Brass, Alum,Bronze and so on

 

Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements. 
2. Inquiry and consulting support. 
3. Sample testing support. 
4. View our Factory.

In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
 technician to provide visiting service after checking with the customer and charge for a favorable price. 
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.