High Frequency Induction Heating Machine (HF-25KW)

• Customization: Available
• Main Use: Heating, Quenching, Forging, Melting, Welding
• Power: 25kw
• Model NO.: HF-25KW
• Frequency: 30-80kHz
• Working, Retail, Cooling Time: 1-99s
• Work Voltage: 380V, 400V, 415V, 440V, 480V
• Product Name: Induction Heating Equipment
• Water Temperature Protection Point: 40c
• Application: Heater, Cooler, Vaporizer, Condenser
• Structure Material: Metal Material
• Heat Transfer Surface: Tubular Heat Exchanger
• Principle: Mixing Heat Exchanger
• Transport Package: Wooden Box
• Specification: CE, ISO
• Trademark: ORD
• Origin: China
• HS Code: 8514400090
• Production Capacity: 10, 000sets

Product Description

High Frequency Induction heating equipment HF-25KW





Advantage:
1 More than ten years experience, stable and goods performance
2 CE certificated
3 Copperated with CHOW TAI FOOKS, Matsushita, Foxconn, Media, Gree and ZHIGAO Air conditioner.
4 Suitable for a large range, heating, quenching, forging, melting, solding and so on.
5 Two transformer ratios, can match better different length induction coil
6 Siemens IGBT
7 IXYS Bridge 
8 DELIXI Switch 


Main characteristics:
2. Main characteristics:
1)Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Display of heating power and heating current and oscillating frequency.
4) Simple to install, Installation can be done by unprofessional person very easily;
5) Light weight
6 ) Advantages of the model with timer: the power and the operating time of   the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
7) The separated models are designed to fit the dirty surrounding of some cases.
8)Heating time can set 1-999S also can set 0.1-99.9S.
9)Water pressure meter install the machine, can check water pressure at the meter, easy to know whether your cooling system is enough or not.
10) Energy Saving Up to 20-30% compare with SCR machine.
11) Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
12) 4 Different working modes:
P0: Means work at the manual, the machine will Sequential timing, Timer 1 shows the heating time, Timer 2 shows working frequency, when you Press, then the machine stop it.  If use the Foot Switch, Step On the Foot Switch not loose it, then the machine is working, loose the foot switch, then the machine stop heating.  
P1: Means Work at time we set it before heating, Timer 1: means heating time( this is countdown count time, Timer 2: Display Working Frequency. For example: If you set heating time 20S, the machine will countdown count time, when finish 20S then stop the machine automatically.  If use the foot switch, Step on the foot switch then loose is at once, the machine is working, when finish the heating time that we set, then the machine stop it automatically.
P2: 2 Sections Heating( Section 1 for heating, section


Technical Parameters:
 

Type	HF-25KW
Work Power	3*380v/415v/440v/480v  50-60hz
The range of operating voltage	340-430V AC
Output power	25KW
Input current	28A
Fluctuating frequency	30-80khz
Timing (Heat time,Retain time,Cool time)	1-99S
The flow rate of cooling water	0.15 Mpa 18L/Min
Water temperature protection point	40centidegree
Duty cycle	100% (40degree room temperature)
Weight	Mainparts:38Kg    Transformer: 25
Size	Main Parts:600*350*600MM Transformer: 550*300*500MM