380V-480V Voltage Induction Heating Machine for Stamping Metal Processing Machinery

Product Description

380V-480V Voltage Induction Heating machine for Stamping Metal Processing Machinery

Induction heating machine :
Induction heating is a growth sector, and for good reasons. The technique is energy efficient, reliable, reproducible, very fast and its range of possible applications is almost unlimited. For example, induction can be used on parts to heat, join, braze, harden, or even melt them. A critical component in these processes is the inductor. Its design is crucial in determining how precisely a part is heated. Complex manufacturing processes are therefore used to produce this central tool with precision to a tenth of a millimeter-a task perfectly suited to the experts at our factory .Our factory's technicians have a thorough understanding of the different applications of induction heating. For more than 25 years, they have been developing inductors to match, which are adapted to the geometry of the workpiece with painstaking dimensional accuracy.

The crucial quality in induction heating is best summarized by the word "precision." The technology is used anywhere where a lot of energy or heat needs to be applied to a workpiece in a very short time. Temperature accuracy plays an important role here and is often process critical - and precise heating is only possible with the right mix of inductor geometry, frequency, power, and magnetic field characteristics. Furthermore, the application of energy through induction ensures fast production processes, minimal workpiece distortion, and economical energy consum

2. Main characteristics:
1)Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Display of heating power and heating current and oscillating frequency.
4) Simple to install, Installation can be done by unprofessional person very easily;
5) Light weight
6 ) Advantages of the model with timer: the power and the operating time of   the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
7) The separated models are designed to fit the dirty surrounding of some cases.
8)Heating time can set 1-999S also can set 0.1-99.9S.
9)Water pressure meter install the machine, can check water pressure at the meter, easy to know whether your cooling system is enough or not.
10) Energy Saving Up to 20-30% compare with SCR machine.
11) Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
12) 4 Different working modes:
P0: Means work at the manual, the machine will Sequential timing, Timer 1 shows the heating time, Timer 2 shows working frequency, when you Press, then the machine stop it.  If use the Foot Switch, Step On the Foot Switch not loose it, then the machine is working, loose the foot switch, then the machine stop heating.  
P1: Means Work at time we set it before heating, Timer 1: means heating time( this is countdown count time, Timer 2: Display Working Frequency. For example: If you set heating time 20S, the machine will countdown count time, when finish 20S then stop the machine automatically.  If use the foot switch, Step on the foot switch then loose is at once, the machine is working, when finish the heating time that we set, then the machine stop it automatically.
P2: 2 Sections Heating( Section 1 for heating, section


INDUCTION HEATING EQUIPMENT  APPLICATIONS :


DSP-MF-600KW TECHNICAL PARAMETERS:

Type	DSP-M600KW
Work power	3×380V/415V,440V,480V( 50-60hz)
The range of operating voltage	340V-480V
Output power	600 KW
Working Capacity ( diamater)	10-180MM
Input current	800A
Timing	1-99S
Working Duty	24hours withou stop
Fluctuating frequency	1-15KHZ
The flow rate of cooling water	0.08-0.16 Mpa  28L/Min
Water temperature protection point	40ºC
Duty cycle	100%(40degree room temperature)
Weight:	Main parts: 350KG
Forging Furnace Weight	About 330KG
Size:	Main Parts: 600*750*1450mm Extensive Parts: 1200*800*1300mm

Pre-sale service:
1. recommend the most suitable machine for customers, according to their requirements. 
2. Inquiry and consulting support. 
3. Sample testing support. 
4. View our Factory.

In-sale service:
1. Strictly manufacture the machine, according to relevant technical standards.
2. Take run test, according to relevant equipment test run regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
 technician to provide visiting service after checking with the customer and charge for a favorable price. 
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee.